GSO ISO 2603:2013
Gulf Standard
Current Edition
·
Approved on
01 April 2013
·
Booths for simultaneous interpretation -- General characteristics and equipment
GSO ISO 2603:2013 Files
English
13 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 2603:2013 Scope
This International Standard lays down basic specifications to be considered when initial plans are prepared for building
or renovating built-in booths for simultaneous interpretation in new or existing buildings.
It is applicable to all types of built-in booths with built-in or portable equipment.
NOTE 1 Mobile booths for simultaneous interpretation are specified in ISO 4043.
In designing new buildings, booths should be optimally integrated into the structure so that the conference room and
the booths constitute a well-balanced unit. Design should also provide daylight for the conference hall and booths.
The requirements of clauses 4 and 5 apply to booths with built-in equipment, as defined in 3.1, and booths with
portable equipment, as defined in 3.2.
The dimensional requirements apply equally to semi-permanent booths, as defined in 3.3, for which all other
requirements should apply as far as is possible.
In addition to structural and design specifications, this International Standard specifies those components of typical
conference facilities which form the interpreters working environment.
NOTE 2 Clause 12 gives indications concerning the use of public address systems in conjunction with simultaneous interpretation
systems.
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
GSO OIML R121:2007
OIML R 121:1996
Gulf Standard
The Scale of Relative Humidity of Air
Certified Against Saturated Salt Solutions
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
Recently Published from Metrology Sector
GSO ISO 12999-2:2024
ISO 12999-2:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 2: Sound absorption
GSO ISO 3864-2:2024
ISO 3864-2:2016
Gulf Standard
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels
GSO ISO 12179:2024
ISO 12179:2021
Gulf Standard
Geometrical product specifications (GPS) — Surface texture: Profile method — Calibration of contact (stylus) instruments
GSO ISO/TR 17534-4:2024
ISO/TR 17534-4:2020
Gulf Standard
Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1